Model: S8157B248-050A
Flat WasherProperties:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Part S8157B248-050A NSN 5310-00-540-9848
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this flat washer (NSN 5310-00-540-9848)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in nuts and washers
-
107816 stamped nut
NSN 5310-00-010-7816Stamped nut style, 0.140 inches nut height, 0.625 inches width across flats, steel material, cadmium or zinc surface treated
-
MS27151-19 stamped nut
NSN 5310-00-010-7823Stamped nut style, 0.130 inches nut height, 0.551 inches width across flats, steel comp 1050 or steel comp 1551 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064 or steel comp 1065 or steel comp 1566 material
-
107824 stamped nut
NSN 5310-00-010-7824Stamped nut style, 0.150 inches nut height, 0.625 inches width across flats, steel comp 1045 or steel comp 1046 or steel comp 1049 or steel comp 1050 or steel comp 1053 or steel comp 1055 or steel comp 1060 or steel comp 1070 or steel comp 1078 or steel comp 1080 or steel comp 1084 or steel comp 1090 or steel comp 1095 material
-
MS27151-24 stamped nut
NSN 5310-00-010-7825Nut
-
MS27151-28 stamped nut
NSN 5310-00-010-7826Stamped nut style, 0.194 inches nut height, 0.938 inches width across flats, steel material, cadmium or zinc surface treated
-
107827 stamped nut
NSN 5310-00-010-7827Nut
Schedule B and Export
- Schedule B: 7616108000
- SITC: 69440
- End Use: Finished metal shapes
- NAICS: 332722
- USDA: 1
Freight Class: Cotters, cotter-pins, washers and similar articles, of aluminum
Highest Rated Parts
-
34694 Hexagon Head Cap Screw
NSN 5305-00-068-0502
-
3M1255E4L8 Pin-rivet
NSN 5320-01-491-4875
-
C-1550 Ball Valve
NSN 4820-01-116-9894
-
0N124298 Linear Microcircuit
NSN 5962-00-489-2221
Recently Purchased Parts
-
0N089301 Electrical Card Holder
NSN 5998-00-453-8768
-
B677B022 Machine Key
NSN 5315-01-424-1465
-
TR81319PC1305522 Induct Wire Wound Fixed Resistor
NSN 5905-00-369-1476
-
C4F1945-1 Aircraft Floor Tie Down Adapter
NSN 1670-00-476-2756
Hot Parts
-
NN-H-93 GRASZ14IN. Hammer Handle
NSN 5120-00-299-8431
-
X1047A1PC51-163-164 Shaft And Sleeve
NSN 2240-00-365-6551
-
63210 Ring Spacer
NSN 5365-00-266-6744
-
30814260-6 Compression Helical Spring
NSN 5360-00-514-7212