Model: S8154-164-010
ShimProperties:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Part S8154-164-010 NSN 5365-00-244-2910
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this shim (NSN 5365-00-244-2910)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in spacers shims rings bushings
-
A02R2880-1 sleeve spacer
NSN 5365-00-044-1428Spacer
-
128BP10022-5 ring spacer
NSN 5365-00-044-14374.546 inches inside diameter, 5.125 inches outside diameter, 0.125 inches overall thickness, plastic polytetrafluoroethylene material
-
27713-960 shim
NSN 5365-00-044-16920.125 inches outside diameter, 0.064 inches aperture diameter, one-piece construction, steel material, qq-s-698 fed spec single material response material document and classification
-
NAS43HT4-72 sleeve spacer
NSN 5365-00-044-22611.1200 inches overall length, 0.3650 inches body outside diameter, 0.2560 inches body inside diameter, square all corners corner shape
-
1-100-374-01 sleeve spacer
NSN 5365-00-044-28540.2990 inches overall length, 0.4360 inches body outside diameter, 0.2170 inches body inside diameter, chamfered outside left corner corner shape
-
54-215 sleeve spacer
NSN 5365-00-044-28591.9580 inches overall length, 2.3750 inches body outside diameter, 2.3150 inches body inside diameter, square all corners corner shape
Schedule B and Export
- Schedule B: 7326908595
- SITC: 69969
- End Use: Finished metal shapes
- NAICS: 332999
- USDA: 1
Freight Class: Other articles of iron or steel not wire nesoi
Highest Rated Parts
-
MS35036-159 Lug Terminal
NSN 5940-01-177-4618
-
10586N Compressor Piston
NSN 4310-00-167-8876
-
MIL-PRF-55182/1 Film Fixed Resistor
NSN 5905-01-501-5733
-
171356 Tapping Screw
NSN 5305-00-017-1356
Recently Purchased Parts
-
10H7F4 Switch Assembly
NSN 5930-01-053-1176
-
74A835629-1011 Air Conditioning-h Duct Assembly
NSN 1660-01-226-5259
-
23514315 Helical Gear
NSN 3020-01-443-0290
-
2000849 ITEM 1 Lig Matrix Assembly
NSN 6220-01-443-1899
Hot Parts
-
471H1535-25 Circuit Card Assembly
NSN 5998-01-201-5350
-
2231B1 Counting Indicator
NSN 6610-00-732-0037
-
SC-5 Scintillation Counter
NSN 6665-01-055-5956
-
MILS18410 Metal Bar
NSN 9510-00-081-7123