Model: S1438-1
Flat WasherProperties:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Part S1438-1 NSN 5310-00-135-9662
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this flat washer (NSN 5310-00-135-9662)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in nuts and washers
-
107816 stamped nut
NSN 5310-00-010-7816Stamped nut style, 0.140 inches nut height, 0.625 inches width across flats, steel material, cadmium or zinc surface treated
-
MS27151-19 stamped nut
NSN 5310-00-010-7823Stamped nut style, 0.130 inches nut height, 0.551 inches width across flats, steel comp 1050 or steel comp 1551 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064 or steel comp 1065 or steel comp 1566 material
-
107824 stamped nut
NSN 5310-00-010-7824Stamped nut style, 0.150 inches nut height, 0.625 inches width across flats, steel comp 1045 or steel comp 1046 or steel comp 1049 or steel comp 1050 or steel comp 1053 or steel comp 1055 or steel comp 1060 or steel comp 1070 or steel comp 1078 or steel comp 1080 or steel comp 1084 or steel comp 1090 or steel comp 1095 material
-
MS27151-24 stamped nut
NSN 5310-00-010-7825Nut
-
MS27151-28 stamped nut
NSN 5310-00-010-7826Stamped nut style, 0.194 inches nut height, 0.938 inches width across flats, steel material, cadmium or zinc surface treated
-
107827 stamped nut
NSN 5310-00-010-7827Nut
Schedule B and Export
- Schedule B: 3926904500
- SITC: 89399
- End Use: Other industrial supplies
- NAICS: 339991
- USDA: 1
Freight Class: Gaskets,washers & other seals
Highest Rated Parts
-
8659656G2 Voltage Regulator Subassembly
NSN 6110-00-500-0118
-
1N3062 Diode Semiconductor Device
NSN 5961-00-923-0952
-
2N956 Transistor
NSN 5961-00-059-3063
-
4M30F1-4N7 Rotary Switch
NSN 5930-00-434-2446
Recently Purchased Parts
-
11439450-2 Pin
NSN 5315-01-165-3970
-
63D720723G101 Circuit Card Assembly
NSN 5998-01-145-3482
-
0N517382 Circuit Card Assembly
NSN 5998-01-227-0082
-
7020F1222PC5 Compression Helical Spring
NSN 5360-00-527-2216
Hot Parts
-
E4418B-908 Wattmeter
NSN 6625-01-476-3139
-
ASTM A527 Metal Strip
NSN 9515-00-229-9386
-
C294913-2 Retaining Band
NSN 5340-00-222-4600
-
7648790PT1 Electrical Receptacle Connector
NSN 5935-00-457-0665