Model: QQS741
Structural BeamAny acceptable fabrication method, 3.000 inches overall height, 20.000 feet length, 5.700 pounds per linear foot weight per unit measure.
Properties:
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. Letter h section may have a maximum of 5 percent slope on the inside face of the flanges.
Part QQS741 NSN 9520-00-027-0882
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this structural beam (NSN 9520-00-027-0882)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in structural shapes
-
QQS630 structural angle
NSN 9520-00-066-1038Hot rolled fabrication method, 2.000 inches overall height, 2.000 inches overall width, 20.000 feet length, 0.250 inches left side flange thickness
-
QQS630 structural angle
NSN 9520-00-066-1040Hot rolled fabrication method, 1.500 inches overall height, 1.500 inches overall width, 20.000 feet length, 0.250 inches left side flange thickness
-
QQS630 structural angle
NSN 9520-00-066-1041Hot rolled fabrication method, 1.250 inches overall height, 1.250 inches overall width, 20.000 feet length, 0.250 inches left side flange thickness
-
QQS630 structural angle
NSN 9520-00-066-1035Hot rolled fabrication method, 2.000 inches overall height, 2.000 inches overall width, 20.000 feet length, 0.312 inches left side flange thickness
-
QQS630 structural angle
NSN 9520-00-066-1036Hot rolled fabrication method, 2.500 inches overall height, 2.500 inches overall width, 20.000 feet length, 0.250 inches left side flange thickness
-
ASTM A575 structural angle
NSN 9520-00-061-6513Hot rolled fabrication method, 2.000 inches overall height, 2.000 inches overall width, 20.000 feet length, 0.250 inches left side flange thickness
Schedule B and Export
- Schedule B: 7601100000
- SITC: 68411
- End Use: Aluminum and alumina
- NAICS: 331313
- USDA: 1
Freight Class: Unwrought aluminum, not alloyed
Highest Rated Parts
-
CA3021 Linear Microcircuit
NSN 5962-01-093-0947
-
A51P9050-3 Fluid Filter Element
NSN 4330-01-089-9843
-
106B5635G1 Permanent Magnet
NSN 5999-00-928-9463
-
237672 Exhaust Control Valve
NSN 4820-01-276-3262
Recently Purchased Parts
-
MIL-P-23377 Primer Coating
NSN 8010-01-139-3550
-
40076P0X3 Electrical Coil
NSN 5950-01-352-3244
-
5P6377 Outer Bearing Ring
NSN 3110-00-278-7215
-
1421-575818 Valve Magnet
NSN 2915-00-866-7320
Hot Parts
-
6392638-01 FIND 002D4 Tube Fitting Flared Sleeve
NSN 4730-01-540-5986
-
USGS 24K24045 Mc&g Products Topo
NSN 7643-01-640-5261
-
10205-0410 Mica Dielectric Fixed Capacitor
NSN 5910-01-071-1707
-
2333-G Compression Helical Spring
NSN 5360-01-346-2352