Special Features:

0.0468 in. Min 0.0781 in. Max r on short shaft end, 0.0250 in. Min 0.0400 in. Max corner r on bearing od short shaft side, 30 degrees taper 0.3437 in. Lg on long shaft end, 0.1910 in. Diameter hole located 0.2344 in. From end of shaft drilled at 60 degrees angle toward bearing, end play 0.0060 in. Max under 15 lb load, 1 oil groove 0.0312 in. R both sides cut at 30 degrees angle located on od and c/l of bearing

Properties:

A bearing consisting of either a double row of balls, or a combination of a ball and roller mounted on a shaft having a seal on one or both ends of the outer ring. The shaft has integrally formed raceways for the balls, thereby eliminating the necessity of inner rings. Designed primarily for fan and water pump applications.