Model: MIL-S-22499
Shim0.600 inches overall length, 0.600 inches overall width, 0.250 inches outside corner radius, 23 lamination quantity, 0.003 inches lamination thickness.
Properties:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Part MIL-S-22499 NSN 5365-00-003-1735
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this shim (NSN 5365-00-003-1735)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in spacers shims rings bushings
-
A02R2880-1 sleeve spacer
NSN 5365-00-044-1428Spacer
-
128BP10022-5 ring spacer
NSN 5365-00-044-14374.546 inches inside diameter, 5.125 inches outside diameter, 0.125 inches overall thickness, plastic polytetrafluoroethylene material
-
27713-960 shim
NSN 5365-00-044-16920.125 inches outside diameter, 0.064 inches aperture diameter, one-piece construction, steel material, qq-s-698 fed spec single material response material document and classification
-
NAS43HT4-72 sleeve spacer
NSN 5365-00-044-22611.1200 inches overall length, 0.3650 inches body outside diameter, 0.2560 inches body inside diameter, square all corners corner shape
-
1-100-374-01 sleeve spacer
NSN 5365-00-044-28540.2990 inches overall length, 0.4360 inches body outside diameter, 0.2170 inches body inside diameter, chamfered outside left corner corner shape
-
54-215 sleeve spacer
NSN 5365-00-044-28591.9580 inches overall length, 2.3750 inches body outside diameter, 2.3150 inches body inside diameter, square all corners corner shape
Schedule B and Export
- Schedule B: 7507200000
- SITC: 68322
- End Use: Finished metal shapes
- NAICS: 332919
- USDA: 1
Freight Class: Tube or pipe fittings of nickel
Highest Rated Parts
-
R-298906-001 Circuit Card Assembly
NSN 5998-01-079-2811
-
HL754JT-8-16 Pin-rivet
NSN 5320-01-253-9088
-
906-50037-111 Diode Semiconductor Device
NSN 5961-01-565-2568
-
ZX3057 Nonmetallic Special Shaped Seal
NSN 5330-01-032-6503
Recently Purchased Parts
-
142871 Remote Control Lever
NSN 3040-00-897-9490
-
16-108834-4 Plastic Dielectr Fixed Capacitor
NSN 5910-00-101-2590
-
5007576 Nonvehicular Clutch Disk
NSN 3010-01-054-3970
-
MILR10509 Film Fixed Resistor
NSN 5905-00-542-7759
Hot Parts
-
TICS.13.10190 Vehicle Cargo Tie Down
NSN 3990-01-606-9870
-
56MP00BK Medical Instrument And Suppl Bag
NSN 6545-01-504-3085
-
4715FS-12TB50-D00 Tubeaxial Fan
NSN 4140-00-095-3831
-
ASTM B152 Metal Sheet
NSN 9535-01-465-0898