Model: M20708-1D-001

Control Transformer Synchro

Properties:

Body Material
Steel, stainless
Body Style
Standard round c
Shoulder Diameter
Between 0.9995 inches and 1.0000 inches
Pilot Diameter
Between 0.6245 inches and 0.6250 inches
Overall Length
2.3560 inches
Flange Diameter
Between 1.0570 inches and 1.0620 inches
Flange Thickness
0.0930 inches
Undercut Diameter
0.9750 inches
Undercut Width
0.0620 inches
Shaft Diameter
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length
0.5620 inches single shaft
Maximum Tempurature Rise
10.0 degrees celsius
Body Size
11
Stator Input Voltage Rating In Volts
90.0
Stator Input Current Rating
18.0 milliamperes
Stator Input Electrical Power Rating
200.0 milliwatts
Frequency In Hertz
400.0
Zso Impedance Magnitude In Ohms
Between 4350.00 and 5700.00
Zso Impedance Angle In Deg
Between 77.30 and 83.50
Zrs Impedance Magnitude In Ohms
Between 585.00 and 700.00
Zrs Impedance Angle In Deg
Between 22.00 and 32.00
Phase Shift Angle In Deg
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
32.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
60.00
Electrical Error Angular Range In Minutes
-7.0/+7.0
Spline Tooth Quantity
21 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius
0.07 inch-ounces
Alignment Hole Quantity
4
Pilot Length
0.0620 inches
Shoulder Length
0.0620 inches
Mounting Surface To Terminal End Distance
1.7940 inches
Spline Tooth Diametral Pitch
120 single shaft
Shaft Thread Series Designator
Unf single shaft
Shaft Thread Direction
Right-hand single shaft
Shaft Thread Class
2a
Terminal Location
Rear
Shaft Thread Length
0.1900 inches single shaft
Shaft Type
Spline w/threads single shaft
Alignment Hole Depth
0.1250 inches
Transformation Ratio
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter
0.8120 inches
Shaft Thread Size
0.190 inches single shaft
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
5 screw
Specification Data
81349-mil-s-20708/1 government specification
NSN
5990-00-917-4215
Part Number
M20708-1D-001
Description
Synchro,control Transformer
CAGE

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

Part M20708-1D-001 NSN 5990-00-917-4215

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
15289
FIIG:
A07800
Concept No.:
1
App. Key:
B
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
MMAC:
EH
CRITL:
X

Packaging & Shipping

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
0.5000lbs
Item Weight:
--
Item Dim:
--
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q

Freight Classification

NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
NMFC:
062120
UFC:
34760
LTL:
RATING VARIABLE
LCL:
--
WCC:
593
TCC:
Z
SHC:
9
ACC:
Trailers/Vehicles

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this control transformer synchro (NSN 5990-00-917-4215) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 9014900000
  • SITC: 87412
  • End Use: Marine engines, parts
  • NAICS: 334511
  • USDA: 1

Freight Class: Parts & accessories for direction finding compasses and other navigational instruments and appliances

Highest Rated Parts
Recently Purchased Parts
Hot Parts