Model: HR124
Recessed WasherProperties:
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
Part HR124 NSN 5310-00-536-7316
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsFreight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this recessed washer (NSN 5310-00-536-7316)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in nuts and washers
-
107816 stamped nut
NSN 5310-00-010-7816Stamped nut style, 0.140 inches nut height, 0.625 inches width across flats, steel material, cadmium or zinc surface treated
-
MS27151-19 stamped nut
NSN 5310-00-010-7823Stamped nut style, 0.130 inches nut height, 0.551 inches width across flats, steel comp 1050 or steel comp 1551 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064 or steel comp 1065 or steel comp 1566 material
-
107824 stamped nut
NSN 5310-00-010-7824Stamped nut style, 0.150 inches nut height, 0.625 inches width across flats, steel comp 1045 or steel comp 1046 or steel comp 1049 or steel comp 1050 or steel comp 1053 or steel comp 1055 or steel comp 1060 or steel comp 1070 or steel comp 1078 or steel comp 1080 or steel comp 1084 or steel comp 1090 or steel comp 1095 material
-
MS27151-24 stamped nut
NSN 5310-00-010-7825Nut
-
MS27151-28 stamped nut
NSN 5310-00-010-7826Stamped nut style, 0.194 inches nut height, 0.938 inches width across flats, steel material, cadmium or zinc surface treated
-
107827 stamped nut
NSN 5310-00-010-7827Nut
Schedule B and Export
- Schedule B: 7318220000
- SITC: 69422
- End Use: Finished metal shapes
- NAICS: 332722
- USDA: 1
Freight Class: Washers other than lock washers, iron or steel
Highest Rated Parts
-
MIL-C-19978/10 Plastic Dielectr Fixed Capacitor
NSN 5910-01-451-0207
-
3780603 O-ring
NSN 5331-01-579-9171
-
RNR50H3651FS Film Fixed Resistor
NSN 5905-00-005-8931
-
0634111 Hinge Bracket
NSN 5340-00-186-7043
Recently Purchased Parts
-
MIS-20184/5 Electrical Special Purpose Cable
NSN 6145-01-295-2397
-
08RX-2024-A Electrical Resolver
NSN 5990-00-959-1722
-
015-3860-030 Shouldered And Stepped Stud
NSN 5307-01-107-8027
-
6053T36G15 Engine Generator Stator
NSN 2925-01-494-7307
Hot Parts
-
JSFM38AA08ENW Angle Bracket
NSN 5342-01-649-1917
-
71066-04 Push-pull Switch
NSN 5930-01-118-3765
-
99-553-6EN-14319 Push Switch
NSN 5930-01-236-1410
-
FF16925 PC 1.5 Machine Key
NSN 5315-01-483-1526