Special Features:

Eight function pressure compensated 1/2 inch mcv valve system; the basic valve assembly dimensions are as follow - length 13.500 inches, width 8.980 inches and height 9.890 inches; assembly has 8-ports with number 10sae standard thread for swing, telescope, boom and winch; center valve body has pressure and tank ports marked "p" for pressure and "t" for tank, these ports have a number 16sae standard thread, also there are 3-ports on each end with number 8sae standard thread marked "p" for pressure and "t" for tank; two mounting holes 1/4-20 x 0.500 deep on both ends, also two mounting holes 3/8-16 x 0.750 deep on both ends; 8-ports with number 8sae standard thread for outriggers and mast; 3-n.C. 2-way 24v DC solenoids with 1/4 inch spade terminals; two size handles, first handle size is 6.310 inches long from pivot, thread is 3/8-16 x 0.560 long, the second handle size is 4.570 long from pivot, thread is 3/8-16 x 0.560

Properties:

A manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: valve, solenoid. Excludes valve, plug. See also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.