Model: 26900-CG
Flat WasherProperties:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Part 26900-CG NSN 5310-01-431-1246
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this flat washer (NSN 5310-01-431-1246)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in nuts and washers
-
107816 stamped nut
NSN 5310-00-010-7816Stamped nut style, 0.140 inches nut height, 0.625 inches width across flats, steel material, cadmium or zinc surface treated
-
MS27151-19 stamped nut
NSN 5310-00-010-7823Stamped nut style, 0.130 inches nut height, 0.551 inches width across flats, steel comp 1050 or steel comp 1551 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064 or steel comp 1065 or steel comp 1566 material
-
107824 stamped nut
NSN 5310-00-010-7824Stamped nut style, 0.150 inches nut height, 0.625 inches width across flats, steel comp 1045 or steel comp 1046 or steel comp 1049 or steel comp 1050 or steel comp 1053 or steel comp 1055 or steel comp 1060 or steel comp 1070 or steel comp 1078 or steel comp 1080 or steel comp 1084 or steel comp 1090 or steel comp 1095 material
-
MS27151-24 stamped nut
NSN 5310-00-010-7825Nut
-
MS27151-28 stamped nut
NSN 5310-00-010-7826Stamped nut style, 0.194 inches nut height, 0.938 inches width across flats, steel material, cadmium or zinc surface treated
-
107827 stamped nut
NSN 5310-00-010-7827Nut
Schedule B and Export
- Schedule B: 7318220000
- SITC: 69422
- End Use: Finished metal shapes
- NAICS: 332722
- USDA: 1
Freight Class: Washers other than lock washers, iron or steel
Highest Rated Parts
-
10148 Lighting Fixture
NSN 6210-01-470-1714
-
G10299PC25-26-31 Packing Assembly
NSN 5330-00-125-7117
-
HT1 Electrical-electronic Heat Sink
NSN 5999-01-519-0367
-
1KK665 Switch Guard
NSN 5930-01-459-9925
Recently Purchased Parts
-
10159623 Power Base Assembly
NSN 1420-01-128-8717
-
352-9963-000 Electrical-electronic Heat Sink
NSN 5999-00-911-8467
-
40011 ITEM NO 2 Sleeve Nut
NSN 5310-01-393-9947
-
B107.410 Hand Cape Chisel
NSN 5110-01-335-0614
Hot Parts
-
1-WB Pipe Hanger
NSN 5340-00-269-4964
-
ST-24401-N Fluid Filter Element
NSN 4330-00-973-3909
-
316-000R2G0-270F Ceramic Dielectr Fixed Capacitor
NSN 5910-00-643-9108
-
M22684-03-0151 Film Fixed Resistor
NSN 5905-00-957-9137