Model: 164B8117P2
Shim0.115 inches hole diameter, 0.438 inches bolt circle diameter, 0.620 inches outside diameter, 0.255 inches aperture diameter, 3 bolt hole quantity.
Properties:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Part 164B8117P2 NSN 5365-00-009-0696
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsFreight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this shim (NSN 5365-00-009-0696)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
| Hours: | 08:00-18:00 Eastern Standard Time |
| Phone: | +1 470-231-0824 |
| Email: | Contact Form » |
New Products Recently updated in spacers shims rings bushings
-
2585962 shim
NSN 5365-00-050-52260.438 inches hole diameter, 5.124 inches bolt circle diameter, 5.875 inches outside diameter, 4.469 inches aperture diameter, 6 bolt hole quantity
-
2584076 ring spacer
NSN 5365-00-050-52693.497 inches inside diameter, 4.250 inches outside diameter, 0.177 inches overall thickness, casehardened features provided, 58.0 rockwell c hardness rating
-
2587645 ring spacer
NSN 5365-00-050-52723.250 inches inside diameter, 3.750 inches outside diameter, 0.325 inches overall thickness, 125.0 microinches bore surface finish
-
AS5169-03L machine thread plug
NSN 5365-00-050-52913a external thread class, right-hand external , 0.282 inches external thread length, 0.219 inches head height, 0.594 inches overall length
-
2584711 shim
NSN 5365-00-050-52961.500 inches outside diameter, 0.531 inches aperture diameter, 0.093 inches overall thickness, 23 lamination quantity, 0.001 inches lamination thickness
-
2585548 ring spacer
NSN 5365-00-050-55032.062 inches inside diameter, 2.562 inches outside diameter, 0.125 inches overall thickness, qq-a-250/6 h323 fed spec 1st material response material document and classification
Schedule B and Export
- Schedule B: 7326908595
- SITC: 69969
- End Use: Finished metal shapes
- NAICS: 332999
- USDA: 1
Freight Class: Other articles of iron or steel not wire nesoi
Highest Rated Parts
-
HL11V-5-7 Pin-rivet
NSN 5320-00-062-4795
-
8662282-1 Radio Frequency/electromag Panel
NSN 5999-01-360-0297
-
1653P Cylinder Sleeve
NSN 4320-00-293-6830
-
10-160175-6B Elect Cable And Conduit Assembly
NSN 6150-01-213-0853
Recently Purchased Parts
-
100507 Diode Semiconductor Device
NSN 5961-00-738-6461
-
433374 El Engine Starter Relay-solenoid
NSN 2920-01-421-4667
-
10863156 Shaft Assembly
NSN 2520-00-116-2792
-
V320-2-75 Interlocking P Tape
NSN 5325-00-555-2574
Hot Parts
-
122-7312139 PC 23 Plate Spacer
NSN 5365-01-540-0800
-
129-3179 Plain Stud
NSN 5307-01-508-1265
-
FIT7078FA470M Turnlock Fastener Stud
NSN 5325-01-379-6078
-
8359B Gasket
NSN 5330-01-057-8067