Model: 160D950827-235
Cellular Plastic MaterialSpecial Features:
Rectangular with arched cutout on right/short edge: 2.05w, 3.40 from bottom, extending from right edge to left, ending in arc with 2.05 inch radius centered 9.75 from right; bottom edge has cutout: 8.79wx1.16hx0.94d, 6.40 from left; left edge has 3 cutouts: 1.26wx1.40h, 2.20 from top & 1.26wx0.78h, 2.72 from bottom & arched cutout with 2.50 radius centered 6.30 from bottom & 3.30 from left, extending to left edge; near side has lengthwise groove: 2.20wx1.40d along top edge & is marked: "up fwd" in upper left area below groove & with part number in top groove near right edge; far side tapers 0.30 at bottom edge & has semicircular lengthwise groove with 2.00 radius centered 6.88 from bottom edge
Properties:
A bulk material, rectangular in shape, composed of a multitude of individual small cells. It is produced in various lengths, widths, and thicknesses, and may have a finished surface or a rough (natural) surface. It is used for low temperature insulation, buoyancy, and also in the electrical, display, and novelty fields. Excludes core material, cellular, structural; cushioning material, packaging; and insert, packaging.
Part 160D950827-235 NSN 9330-01-502-5610
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this cellular plastic material (NSN 9330-01-502-5610)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in plastics fabricated materials
-
PERMALAM14 plastic strip
NSN 9330-00-270-6793Not specified fabrication method, not rated nonmetallic hardness rating, not rated minimum tensile strength, 4.500 inches width
-
CV21-420514-1 observation window
NSN 9330-00-271-46131 ply quantity, 3.880 inches overall diameter, 0.500 inches overall thickness, any acceptable environmental protection, clear material transparency
-
737189-2 plastic strip
NSN 9330-00-274-8746Solid fabrication method, not rated nonmetallic hardness rating, 2800 pounds per square inch minimum tensile strength, 1.090 inches width
-
EVRKLEERTYPEIIUVAFINISHAGRADEM observation window
NSN 9330-00-275-71631 ply quantity, 5.350 inches overall length, 2.350 inches overall width, 0.250 inches overall thickness, clear material transparency
-
8436984 observation window
NSN 9330-00-276-11071 ply quantity, 7.470 inches overall length, 1.220 inches overall width, 0.187 inches overall thickness, any acceptable environmental protection
-
L-P-535 plastic sheet
NSN 9330-00-279-1314Solid fabrication method, 6800 pounds per square inch minimum tensile strength, 50.000 inches width, 0.010 inches thickness, 1200.000 inches length
Schedule B and Export
- Schedule B: 3921190000
- SITC: 58291
- End Use: Other industrial supplies
- NAICS: 326113
- USDA: 1
Freight Class: Plates,sheets,film,foil & strip,cellular,of other plastics
Highest Rated Parts
-
1182326 Flat Washer
NSN 5310-00-584-5298
-
1916270 Spring Support
NSN 2920-00-753-9625
-
174364 Control Motor
NSN 6105-01-498-9759
-
BOM N25-02296-A POS NR 264.04 Check Valve
NSN 4820-01-627-9144
Recently Purchased Parts
-
7688719 Resistor Assembly
NSN 5905-00-768-8719
-
5961A43 Hand Hammer
NSN 5120-01-420-6312
-
G547-0002-2852-2001-13-23D4 Shouldered Shaft
NSN 3040-01-529-8202
-
MS24667-51 Socket Head Cap Screw
NSN 5305-00-900-4614
Hot Parts
-
4011935 Heat Protective Glove
NSN 8415-01-619-0468
-
HLT116-5-11 Pin-rivet
NSN 5320-01-332-8429
-
3111-0636-001 Special Screw
NSN 5305-00-005-4286
-
M39018/01-1015P Electrolytic Fixed Capacitor
NSN 5910-01-218-5336