Model: 1560H34-137
ShimSpecial Features:
75 degree shim with 45 degrees between cneter of bolt holes and 15 degrees from bold hole centerto end edge
Properties:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Part 1560H34-137 NSN 5365-00-591-6740
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsFreight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this shim (NSN 5365-00-591-6740)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in spacers shims rings bushings
-
2585962 shim
NSN 5365-00-050-52260.438 inches hole diameter, 5.124 inches bolt circle diameter, 5.875 inches outside diameter, 4.469 inches aperture diameter, 6 bolt hole quantity
-
2584076 ring spacer
NSN 5365-00-050-52693.497 inches inside diameter, 4.250 inches outside diameter, 0.177 inches overall thickness, casehardened features provided, 58.0 rockwell c hardness rating
-
2587645 ring spacer
NSN 5365-00-050-52723.250 inches inside diameter, 3.750 inches outside diameter, 0.325 inches overall thickness, 125.0 microinches bore surface finish
-
AS5169-03L machine thread plug
NSN 5365-00-050-52913a external thread class, right-hand external , 0.282 inches external thread length, 0.219 inches head height, 0.594 inches overall length
-
2584711 shim
NSN 5365-00-050-52961.500 inches outside diameter, 0.531 inches aperture diameter, 0.093 inches overall thickness, 23 lamination quantity, 0.001 inches lamination thickness
-
2585548 ring spacer
NSN 5365-00-050-55032.062 inches inside diameter, 2.562 inches outside diameter, 0.125 inches overall thickness, qq-a-250/6 h323 fed spec 1st material response material document and classification
Schedule B and Export
- Schedule B: 7507200000
- SITC: 68322
- End Use: Finished metal shapes
- NAICS: 332919
- USDA: 1
Freight Class: Tube or pipe fittings of nickel
Highest Rated Parts
-
USGS 24K27795 Mc&g Products Topo
NSN 7643-01-635-9312
-
16228100 Push-pull Control Assembly
NSN 2990-00-215-7998
-
04-35301-116 Electrical Plug Connector
NSN 5935-00-910-4963
-
3900401 Cable Assembly
NSN 5995-01-589-6310
Recently Purchased Parts
-
MIL-R-26/3 Induct Wire Wound Fixed Resistor
NSN 5905-00-549-1808
-
928470 Radio Frequency Cable Assembly
NSN 5995-01-233-3348
-
12574914 Solid Rubber Sheet
NSN 9320-01-640-7845
-
3178-018 Annular Ball Bearing
NSN 3110-00-542-0021
Hot Parts
-
V-T-285 Thread
NSN 8310-01-090-5673
-
8M4623 Rotating Assembly
NSN 2895-01-148-0872
-
HST529DL-12-15 Pin-rivet
NSN 5320-01-392-0103
-
TKA7199 U Bolt
NSN 5306-01-290-2694