NSN 5310-01-352-9592

Product Definition Definition of approved item name (AIN): "WASHER,FLAT"

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.

Major End Items End items to which 5310-01-352-9592 is a component of

• AKN Mk-45 5-in./54 Cal Gun
• ATF Hc-130) Ec-130e Mc-130h Sof ( Ac-130h Aircraft
• BQN Lamps Mk Iii Helicopter Landing System
• BRF Tf39-ge-1 (c-5a) Aircraft Engine
• BTA Model Xm1117 Armored Security Vehicle
• BTF F100-pw-100 (f-15a/b/c/d) Aircraft Engine
• BVF F110-ge-100/129 (f-16 C/d) Aircraft Engine
• BYM Tactical Air Opns Module (an/tyq-(23)
• CBF T-38a) J85-ge-5/13 (f-5a/b Aircraft Engine

Identification Item Identification Guide (IIG) and Item Name Code (INC)