Model: 7031504-01
ShimSpecial Features:
Aperture centered along length and 0.690 in. From edge along width. Also, along opposite edge along width is a cut-out portion, 0.220 in. Deep and 1.440 in. Long
Properties:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Part 7031504-01 NSN 5365-01-073-1209
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this shim (NSN 5365-01-073-1209)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in spacers shims rings bushings
-
A02R2880-1 sleeve spacer
NSN 5365-00-044-1428Spacer
-
128BP10022-5 ring spacer
NSN 5365-00-044-14374.546 inches inside diameter, 5.125 inches outside diameter, 0.125 inches overall thickness, plastic polytetrafluoroethylene material
-
27713-960 shim
NSN 5365-00-044-16920.125 inches outside diameter, 0.064 inches aperture diameter, one-piece construction, steel material, qq-s-698 fed spec single material response material document and classification
-
NAS43HT4-72 sleeve spacer
NSN 5365-00-044-22611.1200 inches overall length, 0.3650 inches body outside diameter, 0.2560 inches body inside diameter, square all corners corner shape
-
1-100-374-01 sleeve spacer
NSN 5365-00-044-28540.2990 inches overall length, 0.4360 inches body outside diameter, 0.2170 inches body inside diameter, chamfered outside left corner corner shape
-
54-215 sleeve spacer
NSN 5365-00-044-28591.9580 inches overall length, 2.3750 inches body outside diameter, 2.3150 inches body inside diameter, square all corners corner shape
Schedule B and Export
- Schedule B: 7507200000
- SITC: 68322
- End Use: Finished metal shapes
- NAICS: 332919
- USDA: 1
Freight Class: Tube or pipe fittings of nickel
Highest Rated Parts
-
6L8741 Pipe Plug
NSN 4730-01-297-4510
-
RNC55H8252FS Film Fixed Resistor
NSN 5905-00-138-7008
-
BACG20ZB000553 Nonmetallic Grommet
NSN 5325-01-626-0944
-
12442069-029 Nonmetallic Strip Seal
NSN 5330-01-573-7861
Recently Purchased Parts
-
5820292G5 Cable Assembly
NSN 5995-01-229-2355
-
6490 Label
NSN 7530-01-418-1125
-
24759-F Hexagon Self-locking Nut
NSN 5310-01-063-1755
-
6227 Radio Coil Set Assembly
NSN 5950-00-534-6282
Hot Parts
-
VBE725B3K3K Ceramic Dielectr Fixed Capacitor
NSN 5910-00-901-6551
-
CH16L125B Circuit Breaker
NSN 5925-01-569-8064
-
07-S-0238 Switch Assembly
NSN 5930-01-052-3525
-
5315008403072 Headed Straight Pin
NSN 5315-00-840-3072