Model: 209-060-888-17
Shim0.270 inches hole diameter, 4.500 inches overall length, 2.120 inches overall width, 0.310 inches outside corner radius, 1.500 inches center to center distance between bolt holes along width.
Properties:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Part 209-060-888-17 NSN 5365-00-034-5646
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this shim (NSN 5365-00-034-5646)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
New Products Recently updated in spacers shims rings bushings
-
A02R2880-1 sleeve spacer
NSN 5365-00-044-1428Spacer
-
128BP10022-5 ring spacer
NSN 5365-00-044-14374.546 inches inside diameter, 5.125 inches outside diameter, 0.125 inches overall thickness, plastic polytetrafluoroethylene material
-
27713-960 shim
NSN 5365-00-044-16920.125 inches outside diameter, 0.064 inches aperture diameter, one-piece construction, steel material, qq-s-698 fed spec single material response material document and classification
-
NAS43HT4-72 sleeve spacer
NSN 5365-00-044-22611.1200 inches overall length, 0.3650 inches body outside diameter, 0.2560 inches body inside diameter, square all corners corner shape
-
1-100-374-01 sleeve spacer
NSN 5365-00-044-28540.2990 inches overall length, 0.4360 inches body outside diameter, 0.2170 inches body inside diameter, chamfered outside left corner corner shape
-
54-215 sleeve spacer
NSN 5365-00-044-28591.9580 inches overall length, 2.3750 inches body outside diameter, 2.3150 inches body inside diameter, square all corners corner shape
Schedule B and Export
- Schedule B: 7507200000
- SITC: 68322
- End Use: Finished metal shapes
- NAICS: 332919
- USDA: 1
Freight Class: Tube or pipe fittings of nickel
Highest Rated Parts
-
2056AS0362-1 Aircra Ground Strap
NSN 1710-01-550-4187
-
ISOAJ150NF2406-S Electrical Connector Backshell
NSN 5935-01-483-5934
-
730-031-11 Wheel Assembly Housing
NSN 1680-01-277-3502
-
KJ3921A1REV- Linear Microcircuit
NSN 5962-01-324-8054
Recently Purchased Parts
-
116447-391 Film Fixed Resistor
NSN 5905-00-192-4280
-
V782X63473 Mc&g Products Topo
NSN 7643-01-404-4206
-
44P0640-000 Circuit Card Assembly
NSN 5998-00-568-1849
-
405861857 Electrical Conne Maintenance Kit
NSN 5935-01-358-5494
Hot Parts
-
MIL-W-16878/4 Electrical Wire
NSN 6145-00-843-2472
-
321 Preformed Hose
NSN 4720-00-983-6458
-
21101-909 Assembled Sleeve Bolt
NSN 5306-01-633-1927
-
148257-03 Counterbalance Weight
NSN 3040-01-016-5225