Model: SS5115-4-21
Close Tolerance BoltSpecial Features:
With retaining element on shank, two holes spaced ninety degrees apart
Properties:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Part SS5115-4-21 NSN 5306-01-125-1999
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this close tolerance bolt (NSN 5306-01-125-1999)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
Schedule B and Export
- Schedule B: 7318152000
- SITC: 69421
- End Use: Iron and steel products, other
- NAICS: 332722
- USDA: 1
Freight Class: Bolts and bolts and their nuts or washers exported in the same shipment
Highest Rated Parts
-
2933-003-110J Mica Dielectric Fixed Capacitor
NSN 5910-00-001-3187
-
02634 Needle Roller Bearing
NSN 3110-00-761-3292
-
149401.25IN F250PSI0.625M Sediment Strainer
NSN 4730-01-459-7267
-
10121-5500-11 Circuit Card Assembly
NSN 5998-01-481-7409
Recently Purchased Parts
-
1370AS701-4 Flyers' Antiexposure Wrist Seal
NSN 8475-01-176-9174
-
371353-299 Metal Tube Assembly
NSN 4710-01-431-9609
-
A3-100-001-3KW Circuit Card Assembly
NSN 5998-01-474-1077
-
TFLX480-100 Radio Frequency Cable
NSN 6145-01-504-4211
Hot Parts
-
1214D1614-3 Pipe Flange
NSN 4730-01-361-8663
-
MIL-R-39005/4 Nonind Wire Wound Fixed Resistor
NSN 5905-01-266-0142
-
G583102-1 Backplane Assembly
NSN 5998-01-522-4953
-
3R328 Bond Paper
NSN 7530-01-019-9222