Special Features:

Used for 6 series scte specification drop cables including 60 pct braid, tri-shield and quad shield; the plastic sleeve is pre-positioned and detachably coupled to the connector body; true 360 degrees compression onto cable; installation requires one-step 0.250-0.250 inch cable preparation; quad-sealed system prevents moisture migration; iiridescent chromate finish plus uv resistant plastic; cable retention exceeds 40 lb as specified by scte; nut, post and collar brass; nut and collar finish cadmium plated with iridescent chromate coating; post finish tin plated; o-rings ethylene propylene; environmental properties temperature rating m40.0 to p 140.0 degrees f; moisture migration passes ansi/scte 60 2004

Properties:

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly, electrical. For items without inserts, see shell, electrical connector.