Special Features:

Six bolt holes 0.406 in. Diameter either side of horizontal centerline located 2.500, 6.218, 7.125, 7.968, 9.718 and 11.750 in. From flange bolt hole, flange end 6.750 in. Lg by 1.500 in. Wide w/3 bolt holes 0.719 in. Diameter and 2.625 in. Between bolt hole-centers w/one located on horizontal centerline, straight end chamfered 1.000 in. Along lg, 0.562 in. Along width

Properties:

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.