Model: MS3103-28-22S

Electrical Receptacle Connector

Properties:

Thread Class
2a
Thread Direction
Right-hand
Body Style
Straight shape, flange mount, external coupling
Overall Length
2.188 inches
Overall Height
Between 2.000 inches and 2.031 inches
Overall Width
Between 2.000 inches and 2.031 inches
Environmental Protection
Moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof
Unthreaded Mounting Hole Diameter
Between 0.142 inches and 0.157 inches
Center To Center Distance Between Mounting Facilities Parallel To Height
Between 1.562 inches and 1.567 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
Between 1.562 inches and 1.567 inches
Distance From Mounting Shoulder To Front Face
Between 0.812 inches and 0.843 inches
Threaded Device Type
Coupling facility
Mating End Quantity
1
Contact Position Arrangement Style
28-22 single mating end
Contact Removability
Nonremovable single mating end single contact grouping
Contact Maximum Current Rating In Amps
135.0 single mating end 2nd contact grouping
Contact Maximum Current Rating In Amps
22.0 single mating end 1st contact grouping
Contact Maximum Ac Voltage Rating In Volts
900.0 single mating end single contact grouping
Contact Maximum Dc Voltage Rating In Volts
1250.0 single mating end single contact grouping
Polarization Method
Keyway or multiple keyway
Insert Position In Deg
0.0
Shell Type
Potting
Connector Locking Method
Externally threaded shell
Thread Length
0.629 inches
Operating Tempurature Rating
Between -55.0 degrees celsius and 125.0 degrees celsius
Thready Qty Per Inch (tpi)
18
Thread Size
1.750 inches
Terminal Location
Back single mating end single contact grouping
Contact Material
Copper alloy single mating end single contact grouping
Contact Surface Treatment
Gold single mating end single contact grouping and silver single mating end single contact grouping or silver single mating end single contact grouping
Insert Material
Rubber silicone class q single mating end
Contact Surface Treatment Specification
Mil-g-45204 military specification 1st treatment response single mating end single contact grouping and qq-s-365 federal specification 2nd treatment response single mating end single contact grouping or qq-s-365 federal specification 3rd treatment response single mating end single contact grouping
Terminal Type
Solder well single mating end single contact grouping
Shell Material
Aluminum alloy
Shell Surface Treatment
Cadmium and chromate
Shell Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses
Included Contact Quantity
3 single mating end 1st contact grouping
Included Contact Quantity
3 single mating end 2nd contact grouping
Included Contact Type
Round socket single mating end single contact grouping
Precious Material And Location
Contact surfaces gold and contact surfaces silver
Precious Material And Weight
0.015 gold grains, troy and 0.015 silver grains, troy
Precious Material
Gold and silver
Test Data Document
81349-mil-c-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator
Uns
Specification Data
96906-ms3103 government standard
NSN
5935-00-846-8241
Part Number
MS3103-28-22S
Description
Connector,receptacle,electrical
CAGE
96906

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly, electrical. For items without inserts, see shell, electrical connector.

Part MS3103-28-22S NSN 5935-00-846-8241

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
15093
FIIG:
A039B0
Concept No.:
App. Key:
K
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
G
ESD:
ESD:
MMAC:
CRITL:
X

Packaging & Shipping

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this electrical receptacle connector (NSN 5935-00-846-8241) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 8538907080
  • SITC: 77282
  • End Use: Electric apparatus
  • NAICS: 335314
  • USDA: 1

Freight Class: Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

Highest Rated Parts
Recently Purchased Parts
Hot Parts