Model: MS3100E32-7SX

Electrical Receptacle Connector

Properties:

Thread Class
2a
Thread Direction
Right-hand
Body Style
Straight shape, external coupling strain relief
Overall Length
3.031 inches
Overall Height
Between 2.219 inches and 2.281 inches
Overall Width
Between 2.219 inches and 2.281 inches
Environmental Protection
Moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof
Unthreaded Mounting Hole Diameter
Between 0.168 inches and 0.183 inches
Center To Center Distance Between Mounting Facilities Parallel To Height
Between 1.745 inches and 1.755 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
Between 1.745 inches and 1.755 inches
Cable Entrance Diameter
1.156 inches
Distance From Mounting Shoulder To Front Face
Between 0.875 inches and 0.906 inches
Threaded Device Type
Coupling facility
Mating End Quantity
1
Contact Position Arrangement Style
32-7 single mating end
Contact Removability
Nonremovable single mating end all contact groupings
Contact Maximum Current Rating In Amps
22.0 single mating end 1st contact grouping41.0 single mating end 2nd contact grouping22.0 single mating end 3rd contact grouping
Contact Maximum Ac Voltage Rating In Volts
200.0 single mating end 1st contact grouping500.0 single mating end 2nd contact grouping500.0 single mating end 3rd contact grouping
Contact Maximum Dc Voltage Rating In Volts
250.0 single mating end 1st contact grouping700.0 single mating end 2nd contact grouping700.0 single mating end 3rd contact grouping
Polarization Method
Keyway or multiple keyway
Insert Position In Deg
235.0
Shell Type
Solid
Connector Locking Method
Externally threaded shell
Connector Cable Strain Relief Method
Cable clamp
Operating Tempurature Rating
Between 55.0 degrees celsius and 125.0 degrees celsius
Thready Qty Per Inch (tpi)
18
Thread Size
2.000 inches
Terminal Location
Back single mating end all contact groupings
Contact Material
Copper alloy single mating end all contact groupings
Contact Surface Treatment
Gold single mating end all contact groupings and silver single mating end all contact groupings or silver single mating end all contact groupings
Insert Material
Rubber single mating end
Contact Surface Treatment Specification
Mil-g-45204 military specification 1st treatment response single mating end all contact groupings and qq-s-365 federal specification 2nd treatment response single mating end all contact groupings or qq-s-365 federal specification 3rd treatment response single mating end all contact groupings
Terminal Type
Solder well single mating end all contact groupings
Shell Material
Aluminum alloy
Shell Surface Treatment
Cadmium and chromate
Shell Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses
Included Contact Quantity
4 single mating end 1st contact grouping7 single mating end 2nd contact grouping24 single mating end 3rd contact grouping
Included Contact Type
Round socket single mating end all contact groupings
Precious Material And Location
Contact surfaces gold and contact surfaces silver or contact surfaces silver
Precious Material And Weight
0.063 gold grains, troy and 0.063 silver grains, troy or 0.063 silver grains, troy
Precious Material
Gold and silver or silver
Test Data Document
81349-mil-c-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator
Unef
Specification Data
96906-ms3100 government standard
NSN
5935-01-363-9143
Part Number
MS3100E32-7SX
Description
Connector,receptacle,electrical
CAGE
96906

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly, electrical. For items without inserts, see shell, electrical connector.

Part MS3100E32-7SX NSN 5935-01-363-9143

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
15093
FIIG:
A039B0
Concept No.:
App. Key:
K
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
G
ESD:
ESD:
MMAC:
CRITL:
X

Packaging & Shipping

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
3.0 X 2.3 X 2.3
Paclk Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q

Freight Classification

NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
NMFC:
061680
UFC:
34570
LTL:
RATING VARIABLE
LCL:
--
WCC:
658
TCC:
Z
SHC:
9
ACC:
Instruments/Radio

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this electrical receptacle connector (NSN 5935-01-363-9143) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 8538907080
  • SITC: 77282
  • End Use: Electric apparatus
  • NAICS: 335314
  • USDA: 1

Freight Class: Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

Highest Rated Parts
Recently Purchased Parts
Hot Parts