Model: MIL-DTL-27715

Circuit Breaker
Description:

Single pole type body style, 0.187 inches bushing length, 2.189 inches body length, 0.760 inches body width, plastic case material.

Properties:

Body Style
Single pole type
Bushing Length
Between 0.187 inches and 0.249 inches
Body Length
2.189 inches
Body Width
0.760 inches
Case Material
Plastic
Center To Center Distance Between Terminals Parallel To Length
1.190 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
Between 1.800 inches and 1.820 inches
Fragility Factor
Moderately rugged
Mounting Surface To Terminal End Distance
2.370 inches
Pole Quantity
1
Mounting Facility Type And Quantity
2 threaded hole
Storage Type
General purpose warehouse
Special Handling Feature
Magnetic
Thready Qty Per Inch (tpi)
32
Maximum Continuous Load Current Rating Per Pole
7.5 amperes ac single location and 7.5 amperes dc single location
Maximum Continuous Load Current Rating Per Pole
7.5 amperes ac and 7.5 amperes dc single location
Operating Voltage Type And Rating Per Pole In Volts
115.0 ac single location and
Operating Voltage Type And Rating Per Pole In Volts
28.0 dc single location
Operating Voltage Type And Rating Per Pole In Volts
115.0 ac and 28.0 dc single location
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
5000.0 ac single location and 5000.0 dc single location
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
5000.0 ac and 5000.0 dc single location
Circuit Protection Type
Overcurrent single location
Trip Release Method
Magnetic single location
Trip Release Characteristic
Time delay single location
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
138.0 single location
Reset Method
Manual
Main Contact Tripping Mechanism Type
Trip free
Manual Actuator Type And Quantity
1 push-pull
Actuator Function
Trip-reset
Actuator Position Designation
At pole one
Internal Trip Release Configuration
Series trip single location
Thread Size
0.138 inches
Trip Delay Time In Seconds Per Rated Continuous Current
16.000 at 200 pct single location and 40.000 at 200 pct single location
Trip Delay Time In Seconds Per Rated Continuous Current
16.000 at 200 pct and 40.000 at 200 pct single location
Inclosure Protection Type For Which Designed
Explosion proof and humidity proof and salt spray proof and sandtight and dusttight and vaportight and shock resistant and
Inclosure Protection Type For Which Designed
Fungus proof
Inclosure Protection Type For Which Designed
Explosion proof and humidity proof and salt spray proof and sandtight and dusttight and vaportight and shock resistant and fungus proof
Frequency In Hertz
400.0 single location
Unpackaged Unit Weight
0.200 pounds
Test Data Document
81349-mil-c-27715 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator
Unc
Terminal Type And Quantity
2 tab w/screw
Specification Data
96906-ms24571 government standard
NSN
5925-00-052-0140
Part Number
MIL-DTL-27715
Description
Circuit Breaker
CAGE
81349

A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.

Part MIL-DTL-27715 NSN 5925-00-052-0140

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
00136
FIIG:
A030A0
Concept No.:
App. Key:
A
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
A
ESD:
ESD:
MMAC:
EH
CRITL:
X

Packaging & Shipping

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
4.0 X 4.0 X 1.0
Paclk Weight:
0.2000lbs
Item Weight:
--
Item Dim:
--
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q

Freight Classification

NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
NMFC:
061300
UFC:
34410
LTL:
77.5
LCL:
--
WCC:
658
TCC:
Z
SHC:
9
ACC:
Instruments/Radio

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this circuit breaker (NSN 5925-00-052-0140) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 8536200040
  • SITC: 77252
  • End Use: Electric apparatus
  • NAICS: 335313
  • USDA: 1

Freight Class: Automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

Highest Rated Parts
Recently Purchased Parts
Hot Parts