Special Features:

Configuration: spin-on; flow direction: outside/in; part function: fullflow; bypass/relief valve loc: dome end; dome outside diameter: 2.99 in; gasket inside diameter: 2.47 in; gasket outside diameter: 2.83 in; gasket projection retainer: .111 in; gasket projection seam: .104 in; gasket to 1st thread: .1 in; hot melt beads (l): no; height: 3.52 in; seam outside diameter: 3.05 in; stand pipe: no; threadsize: 3/4-16 unf-2b

Properties:

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes filter element, air conditioning. See also strainer element, sediment.