Special Features:

1st end internal threads 0.338/.331 dia-.59 deep, csk 100 degrees x .41 dia, 3/8 - 24 unf-3b .38 deep; second end 1.400 length, 0.749 in min and 0.758 in max dia; through slot hole 0.300 wide, 0.191 in to 0.198 in max height, 1.330 in from second end; finish g-53, internal threads and holes should be coated with zinc phosphate by immersion per stp 58-302, type 1, cl 2 and overcoat solid film lubricant applied per stp 62-005, type iv, sides and ends of pin coated with karon-type b or equivalent (kamatics corp, bloomfield, ct

Properties:

A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod, straight, headless. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also pin, straight, threaded.