Special Features:

Filter medium pleated polypropylene; support/drainage material polypropylene; end caps glass filled polypropylene; filter dimensions: 6in. Diameter x 20in. Long; max. Flow: 175gpm; absolute removal rating (microns) @ 99.98%: 4.5; filter is coreless, single open ended, pleated cartridge with an inside to outside flow pattern; "ah" end of part number means: "a" 100% bubble tested and "h" means it has a viton gasket

Properties:

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes filter element, air conditioning. See also strainer element, sediment.