Model: H792-8111

Special Features:

First end tapered 15 degrees 0.5600 inches back to end, inside diameter 0.8280 inches for 3.8700 + 0.0030 - 0.0000 inches with 0.600 x 45 degree chamfer at end; second end inside diameter 0.6600 inches for 0.3720 + 0.0030 - 0.0000 inches with 0.0600 x 45 degree chamfer at both ends with one hole drilled and reamed 0.1880 inches diameter 0.1900 inches on center from end. The -1 p/n and the -21 p/n are the exact same item, with no differences. Drawing 556-7106781 decicts both dash numbers because they are used on 2 different applications. The -1 is used on a 400cu inch accumulator with no switch, and the -21 is used on a 400cu inch accumulator with a switch. Each dash number is associated with a different navy apl

Properties: