Special Features:

Max pressure: 150 psig. Membrane complies with mil-prf-32097 and navy standard drawing 803-6983497. These membranes are the 'open architecture' style membranes that are used in the 10 gpm and 50 gpm ows polishers. The polisher system automatically processes the oily/water separator effluent and produces water with an average oil content of 5 ppm suitable for overboard discharge. The elements themselves are made of a cylindrical ceramic support structure, which contains a large number of passageways extending from the inlet to the outlet end. Length: 48.00 inches. Has a 6 inch groved adapter and a 1 inch (37 degrees) flared fitting.

Properties:

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes filter element, air conditioning. See also strainer element, sediment.