Special Features:

One bolt hole has diameter of 0.196 in.; second bolt hole has diameter of 0.125 in.; center to center distance between bolt holes along length is 0.790 in.; distance from bolt hole centerline to nearest edge along width is 0, 310 in.; distance from larger bolt hole centerline to nearest edge along length is 0.310 in.; distance from smaller bolt hole centerline to nearest edge along length is 0.200 in.; four corners are unequally beveled; outside corner bevel length along width is 0.120 in. For two corners located by larger bolt hole; outside corner bevel length along length is 0.120 in. For two corners located by larger bolt hole; outside corner bevel length along width is 0.250 in. For two corners located by smaller bolt hole; outside bevel length along length is 0.250 in. For two corners located by smaller bolt hole.

Properties:

A metallic or nonmetallic item of various peripheral shapes and a solid cross-section. It is designed to maintain a predetermined distance between two surfaces. It may have flat parallel bearing surfaces. Do not use if a more specific name applies. See also spacer, ring; spacer, plate; spacer, sleeve; spacer, stepped; shim and washer, flat.