Special Features:

Max pressure, metal bowl: 250 psig; air supply must be dry enough to avoid ice formation at temp below 35 degrees fahrenheit; approx flow 150 psig inlet pressure, 90 psig set pressure, drop of 15 psig from set; bonnet, aluminum; valve, brass; elastomers, neoprene and nitrile; panel mounting hole diameter, 1.89 in.; panel thickness, 0.06in. To 0.25in.

Properties:

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes filter element, air conditioning. See also strainer element, sediment.