Model: AN3102E18-1P

Electrical Receptacle Connector

Properties:

Thread Class
2a
Thread Direction
Right-hand
Body Style
Straight shape, external coupling
Overall Length
1.938 inches
Overall Height
Between 1.344 inches and 1.406 inches
Overall Width
Between 1.344 inches and 1.406 inches
Environmental Protection
Moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof
Unthreaded Mounting Hole Diameter
Between 0.115 inches and 0.130 inches
Center To Center Distance Between Mounting Facilities Parallel To Height
Between 1.057 inches and 1.067 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
Between 1.057 inches and 1.067 inches
Distance From Mounting Shoulder To Front Face
Between 0.750 inches and 0.781 inches
Threaded Device Type
Coupling facility
Mating End Quantity
1
Contact Position Arrangement Style
18-1 single mating end
Contact Removability
Nonremovable single mating end all contact groupings
Contact Maximum Current Rating In Amps
22.0 single mating end all contact groupings
Contact Maximum Ac Voltage Rating In Volts
200.0 single mating end 2nd contact grouping
Contact Maximum Ac Voltage Rating In Volts
500.0 single mating end 1st contact grouping
Contact Maximum Dc Voltage Rating In Volts
250.0 single mating end 2nd contact grouping
Contact Maximum Dc Voltage Rating In Volts
700.0 single mating end 1st contact grouping
Polarization Method
Key, multiple key groove
Insert Position In Deg
0.0
Shell Type
Solid
Connector Locking Method
Externally threaded shell
Thread Length
0.625 inches
Operating Tempurature Rating
Between -55.0 degrees celsius and 125.0 degrees celsius
Features Provided
Pre-tinned terminal
Thready Qty Per Inch (tpi)
18
Thread Size
1.125 inches
Terminal Location
Back single mating end all contact groupings
Contact Material
Copper alloy single mating end all contact groupings
Contact Surface Treatment
Gold single mating end all contact groupings and nickel single mating end all contact groupings
Insert Material
Rubber single mating end
Contact Surface Treatment Specification
Mil-g-45204, type 1, grade b military specification 1st treatment response single mating end all contact groupings and qq-n-290, cl 1, grade b federal specification 2nd treatment response single mating end all contact groupings
Terminal Type
Solder well single mating end all contact groupings
Shell Material
Aluminum alloy
Shell Surface Treatment
Cadmium and chromate
Shell Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses
Included Contact Quantity
4 single mating end 1st contact grouping
Included Contact Quantity
6 single mating end 2nd contact grouping
Included Contact Type
Round pin single mating end all contact groupings
Precious Material And Location
Contact surfaces gold
Precious Material And Weight
0.010 gold grains, troy
Precious Material
Gold
Test Data Document
81349-mil-c-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator
Unef
Specification Data
96906-ms3102 government standard
NSN
5935-00-295-4778
Part Number
AN3102E18-1P
Description
Connector,receptacle,electrical
CAGE
88044

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly, electrical. For items without inserts, see shell, electrical connector.

Part AN3102E18-1P NSN 5935-00-295-4778

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
15093
FIIG:
A039B0
Concept No.:
App. Key:
K
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
G
ESD:
ESD:
MMAC:
CRITL:
X

Freight Classification

NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
NMFC:
061680
UFC:
34570
LTL:
RATING VARIABLE
LCL:
77.5
WCC:
658
TCC:
Z
SHC:
9
ACC:
Instruments/Radio

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this electrical receptacle connector (NSN 5935-00-295-4778) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 8538907080
  • SITC: 77282
  • End Use: Electric apparatus
  • NAICS: 335314
  • USDA: 1

Freight Class: Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

Highest Rated Parts
Recently Purchased Parts
Hot Parts