Special Features:

Consist of lockwire, as required; solder, as required; primer, as required; locking compound, as required; 2 plates, ident, 1 protective cap; wire, elect, as required; 1 pin, locking; 2 nuts, self locking; 5 gaskets; 3 lockwashers; 4 elect connectors; 37 washers, flat; 43 screws, sch; 1 screw set, slf lkg; 2 bolts, pan head; 3screws, captive; 1 screw, sh flat; 16 screws, locking; 1 set screw, oval point; 1 screw, pan hd, lkg; 3 covers; 1 cover, emi filter assembly; 1 cap, switch assembly; 1 2 caps, detector switch; 1 sleeve, anti rotation; 1 sleeve, switch; 1 sleeve; 3 endcaps; 1 terminal, uninsulated; 2 piston ring sets; 24 o-rings; 4 seals, channel; 6 packings, preformed; 6 rings, backup; 38 seal assemblies; 1 seat, spring adjust; 5 seats, spring; 2 spring seats, stop; 1 spring, compression; 2 springs, lofes input; 6 springs; 1 retainer assembly; 8 retainers, threaded; 1 ring, threaded; 4 retainers, filter disc; 1 plug, o-ring; 1 plate, union retainer; 1 sleeve, guide

Properties:

A manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: valve, solenoid. Excludes valve, plug. See also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.