Special Features:

Consists of cmpd ctg solvent reducer, as required; cmpd ctg curing solution, as required; cmpd ctg primer base green, as required; 1 ident plate; 4 retainers, disk; 4 filters, disk; lockwire, as required; 5 screws, panhead; 1 gasket, conn; 1 elect conn; 1 terminal, uninsulated; wire, elect, as required; solder, as required; 1 em1 filter and wire assembly; 6 washers, flat; 23 screws; 9 o-rings; 1 cover, emi; 7 washers, flat; 1 cover, switch; 1 switchand lever assembly; 1 cap; 1 switch assembly; 15 packing assemblys; 2 gaskets; 2 solenoidassys; 2 pistons; 4 seats, spring; 4 springs; 4 retainers; 2 bsa fitted; 4 end caps; 1 body assembly

Properties:

A manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: valve, solenoid. Excludes valve, plug. See also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.