Model: A111-13J
Close Tolerance BoltSpecial Features:
Identification disk on top of head 0.550 in. Dia, 0.030 in. Depth
Properties:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Part A111-13J NSN 5306-00-469-1982
Material Classification
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicatorsPackaging & Shipping
Freight Classification
Pricing & Availability Check
Submit this form for stock availability and pricing.How to Order
Ordering from buyaircraftparts.comIf you would like to order this close tolerance bolt (NSN 5306-00-469-1982)
please submit the pricing and availability form above to receive an up to date quote by email.
If you agree to the pricing and terms you can e-sign your order online!
We are pleased to have the opportunity to serve you.
Have a Question
Hours: | 08:00-18:00 Eastern Standard Time |
Phone: | +1 470-231-0824 |
Email: | Contact Form » |
Schedule B and Export
- Schedule B: 7318152000
- SITC: 69421
- End Use: Iron and steel products, other
- NAICS: 332722
- USDA: 1
Freight Class: Bolts and bolts and their nuts or washers exported in the same shipment
Highest Rated Parts
-
232456 Flexible Drive Shaft
NSN 3040-01-311-6124
-
5145052 Diesel Engine Block
NSN 2815-00-394-9721
-
69091 Liquid Level Switch
NSN 5930-01-504-9280
-
A3421159820-01 Plug Dummy Connector
NSN 5935-01-444-0832
Recently Purchased Parts
-
2851-1 Code Indicating Wheel Switch
NSN 5930-00-557-4231
-
CEC511-38 Controlled Environment Chamber
NSN 6640-01-032-4648
-
12621 Seal
NSN 5330-01-052-2249
-
BEBX1-446161 Flat Washer
NSN 5310-00-044-6161
Hot Parts
-
130-6805 Mica Dielectric Fixed Capacitor
NSN 5910-01-044-5616
-
815-254F1 Hexagon Plain Nut
NSN 5310-00-269-6498
-
MIL-PRF-44489 Shelf Beef Ravioli In Meat Sauce
NSN 8940-01-426-0553
-
RC07GF512J Composition Fixed Resistor
NSN 5905-00-111-1679