Special Features:

Workmanship shall be in accordance with mil-hdbk-454; remove and discard circuit breaker on-off plate; torque threaded fasteners as follows: .112-40-3to5 in/lb (connectors, cover mtg).138-32-5 to 8 in/lbs(circuit breaker terminals).164-32-8 to11 in/lbs(tb1, tb2 mounting/terminals); .190-32-11 to 15 in/lbs(e1, enclosure mtg); mark find no.40 wire markers, per wiring table, sheet 2 and locate at all applicable wire terminations.Mark with .19 high characters per mil-std-130 using black ink per a-a-208; rubber stamp or stencil the following markings in accordance with mil-std-130 using black ink a-a-208 at location shown.Character size shall be .13 +/- .02 high.(01365assy97008a3100)

Properties:

An enclosure which includes mounts, and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to distribute electrical power from one or more primary power source(s) such as generator(s) and battery(ies) to one or more electrical and/or electronic item(s). It may include a cover or door. For enclosures which include only circuit breakers, switches, jacks, fuseholders, terminals and/or terminal boards, see circuit breaker box; switch box; jack box; fuse box and terminal box. For enclosure primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) see interconnecting box. For empty boxes which are designed to mount, but do not include electrical devices such as switches, jacks, fuseholders, terminals and/or terminal boards, see junction box. See also interconnecting cabinet; control (as modified); panel (1) (as modified); relay assembly; panel, power distribution; switchboard (as modified) and panel, fuse. Excludes connector-switch.