Model: 805361-1

Pre Wire Wound Variable Resistor

Properties:

Section Quantity
4
Body Style
Cylindrical servo mounted
Reliability Indicator
Not established
Pilot Diameter
Between 1.2495 inches and 1.2500 inches
Pilot Length
Between 0.0570 inches and 0.0670 inches
Overall Length
3.625 inches
Undercut Diameter
1.880 inches
Undercut Width
0.0570 inches
Body Diameter
2.030 inches
Shaft Diameter
Between 0.1869 inches and 0.1872 inches
Shaft Length
Between 0.630 inches and 0.650 inches
Body Length
2.885 inches
Mounting Lip Diameter
Between 1.9950 inches and 2.0050 inches
Mounting Lip Depth
Between 0.0570 inches and 0.0670 inches
Shaft Style
Round, slotted
Shaft Bearing Type
Ball
Switch Type
Rotary
Switch Voltage Rating In Volts
28.0
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
349.8
Maximum Starting Torque
2.60 inch-ounces
Shaft End Play
0.005 inches
Shaft Runout
0.002 inches
Lateral Runout
0.004 inches
Pilot Diameter Runout
0.001 inches
Shaft Radial Play
0.002 inches
Mechanical Backlash In Deg Angular Rotation
0.1
Switch Operating Position
Start of rotation
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained
Terminal Location
Radially positioned over less than half the circumference
Mounting Method
Clamp ring
Features Provided
Switch
Electrical Resistance Per Section
2.0 percent, rated amperes c and better finish
Electrical Resistance Per Section
20.0 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section
2.0 kilohms 1st section
Electrical Resistance Per Section
20.0 kilohms 2nd section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
75.4 3rd section
Rotary Actuator Travel In Angular Deg
360.0
Function Conformity Tolerance Per Section
-0.00035/+0.00035 4th section
Function Conformity Tolerance Per Section
-0.01/+0.01 3rd section
Function Conformity Tolerance Per Section
-0.25/+0.25 1st section
Function Conformity Tolerance Per Section
-0.25/+0.25 2nd section
Function Conformity Tolerance Per Section
-0.00035 to 0.00035 4th section
Function Conformity Tolerance Per Section
-0.01 to 0.01 3rd section
Function Conformity Tolerance Per Section
-0.25 to 0.25 1st section
Function Conformity Tolerance Per Section
-0.25 to 0.25 2nd section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 all sections
Power Dissipation Rating Per Section In Watts
4.0 free air all sections
Function Conformity Per Section
All sections absolute conformity
Fixed Tap Quantity Per Section
1 3rd section
Tap Location Tolerance Per Section
-5.0/+5.0 degrees angular rotation 3rd section
Tap Location Tolerance Per Section
-5.0 to 5.0 degrees angular rotation 3rd section
Resistance Tolerance Per Section In Percent
-2.5/+2.5 4th section
Resistance Tolerance Per Section In Percent
-2.0/+2.0 1st section
Resistance Tolerance Per Section In Percent
-2.0/+2.0 2nd section
Resistance Tolerance Per Section In Percent
-5.0/+5.0 3rd section
Resistance Tolerance Per Section In Percent
-2.5 to 2.5 4th section
Resistance Tolerance Per Section In Percent
-2.0 to 2.0 1st section
Resistance Tolerance Per Section In Percent
-2.0 to 2.0 2nd section
Resistance Tolerance Per Section In Percent
-5.0 to 5.0 3rd section
Actuator Travel Control Feature
Stops
Function Characteristic Per Section
10 oclock primary input
Function Characteristic Per Section
11 oclock primary input
Function Characteristic Per Section
8 oclock 12th primary
Function Characteristic Per Section
9 oclock 12th primary
Function Characteristic Per Section
1st section graph
Function Characteristic Per Section
2nd section graph
Function Characteristic Per Section
3rd section equation
Function Characteristic Per Section
4th section equation
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0/+20.0 all sections
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0 to 20.0 all sections
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
65.0 all sections
Switch Current Type And Rating In Amps
0.005 dc
Unpackaged Unit Weight
6.50 ounces
Precious Material And Location
Terminal surfaces gold
Precious Material
Gold
Test Data Document
70210-805361 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
15 turret
NSN
5905-00-104-9413
Part Number
805361-1
Description
Resistor,variable,wire Wound,pre
CAGE
64547

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.

Part 805361-1 NSN 5905-00-104-9413

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
37408
FIIG:
A002A0
Concept No.:
1
App. Key:
D
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
G
ESD:
B
ESD:
B
MMAC:
EH
CRITL:
X

Packaging & Shipping

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
2.5000lbs
Item Weight:
--
Item Dim:
--
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
ZZ
LVL_A:
Q
LVL_B:
Q

Freight Classification

NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
NMFC:
062960
UFC:
35140
LTL:
77.5
LCL:
--
WCC:
657
TCC:
3
SHC:
9
ACC:
Instruments/Radio

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this pre wire wound variable resistor (NSN 5905-00-104-9413) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 8533390080
  • SITC: 77233
  • End Use: Electric apparatus
  • NAICS: 334416
  • USDA: 1

Freight Class: Wirewound variable resistors, nesoi

Highest Rated Parts
Recently Purchased Parts
Hot Parts