Special Features:

Hlever is made in three pieces welded together; bar is welded to end of extension at a 51deg angle; two 0.78in. Diameter holes centered 2in. Apart are drilled through the center line of the width of the bar. The farthest end hole is 13/16in. From the end of the bar; hand grip is hot rolled steel no.1018, 4 in. Lg, 1 in. Dia; extension is hot rolled steel no.1020 3/8 in. X 1-1/2 x 27-11/16 in.; bar is hot rolled steel no.1020, 5/8 in. X 1-1/2 x 5-11/16 in. Lg

Properties:

A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link, rigid; wire rope assembly, single leg; and clevis, rod end; etc.. Excludes arm (as modified); lever, remote control; and bell crank.