Special Features:

Piston assembly: assemble piston into power plate using a shop press, take care not to damage the o-ring or polytetrafluoroethylene backup rings; visually align the center of the cutouts in the piston with the torque pin holes in the power plate; the depth the piston is installed into the power plate is critical; the surface of the piston at the cutouts must be flush to 0.120 below the surface of the power plate or piston will cock resulting in a complete loss of braking; piston disassembly: remove the piston from the power plate by introducing low pressure air (15 psi) into the hydraulic inlet; make sure piston is directed away operator; do not remove backup rings or o-ring unless replacement is necessary because they will be damaged

Properties:

A cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. it may include an integral rod.