Model: 752-6240

Nonwire Wound Variable Resistor

Properties:

Section Quantity
11
Body Style
Cylindrical servo mounted
Reliability Indicator
Not established
Pilot Diameter
0.9688 inches
Pilot Length
0.6200 inches
First Flat Length
0.375 inches
Flat Height
0.105 inches
Undercut Diameter
0.968 inches
Undercut Width
0.0570 inches
Body Diameter
1.062 inches
Shaft Diameter
0.1247 inches
Shaft Length
0.437 inches
Body Length
2.680 inches
Mounting Lip Diameter
1.0750 inches
Mounting Lip Depth
0.0620 inches
Shaft Style
Round, flatted
Shaft Bearing Type
Ball
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
340.0
Maximum Starting Torque
3.45 inch-ounces
Maximum Running Torque
3.45 inch-ounces
Maximum Stop Torque
32.00 inch-ounces
Shaft End Play
0.005 inches
Shaft Runout
0.002 inches
Lateral Runout
0.001 inches
Pilot Diameter Runout
0.001 inches
Shaft Radial Play
0.001 inches
Terminal Location
Radially positioned over more than half the circumference
Mounting Method
Clamp ring
Electrical Resistance Per Section
10.0 percent, rated amperes c and better finish
Electrical Resistance Per Section
2.0 percent, rated amperes c select
Electrical Resistance Per Section
20.0 percent, rated amperes c drop siding
Electrical Resistance Per Section
20.0 percent, rated amperes c finish
Electrical Resistance Per Section
20.0 percent, rated amperes c flooring
Electrical Resistance Per Section
20.0 percent, rated amperes c industrial
Electrical Resistance Per Section
30.0 percent, rated amperes c and better select
Electrical Resistance Per Section
30.0 percent, rated amperes c ship decking
Electrical Resistance Per Section
30.0 percent, rated amperes foundation
Electrical Resistance Per Section
7.5 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section
7.5 percent, rated amperes c and better v.G. Stepping
Electrical Resistance Per Section
20.0 kilohms 6th section
Electrical Resistance Per Section
20.0 kilohms 8th section
Electrical Resistance Per Section
30.0 kilohms 10th section
Electrical Resistance Per Section
7.5 kilohms 2nd section
Electrical Resistance Per Section
7.5 kilohms 4th section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
156.36 5th section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
156.36 6th section and 232.72 6th section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
156.36 7th section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
156.36 8th section and 232.72 8th section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
38.17 2nd section and 87.27 2nd section and 136.37 2nd section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
38.17 4th section and 87.27 4th section and 136.37 4th section
Rotary Actuator Travel In Angular Deg
360.0
Function Conformity Tolerance Per Section
-0.30/+0.30 11th section
Function Conformity Tolerance Per Section
-0.25/+0.25 1st section
Function Conformity Tolerance Per Section
-0.65/+0.65 10th section
Function Conformity Tolerance Per Section
-0.65/+0.65 3rd section
Function Conformity Tolerance Per Section
-1.00/+1.00 2nd section
Function Conformity Tolerance Per Section
-1.00/+1.00 4th section
Function Conformity Tolerance Per Section
-2.00/+2.00 9th section
Function Conformity Tolerance Per Section
-1.50/+1.50 5th section
Function Conformity Tolerance Per Section
-1.50/+1.50 6th section
Function Conformity Tolerance Per Section
-1.50/+1.50 7th section
Function Conformity Tolerance Per Section
-1.50/+1.50 8th section
Function Conformity Tolerance Per Section
-0.25 to 0.25 1st section
Function Conformity Tolerance Per Section
-0.65 to 0.65 10th section
Function Conformity Tolerance Per Section
-0.65 to 0.65 3rd section
Function Conformity Tolerance Per Section
-1.50 to 1.50 5th section
Function Conformity Tolerance Per Section
-1.50 to 1.50 8th section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
100.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-400.0/+400.0 all sections
Power Dissipation Rating Per Section In Watts
1.0 free air all sections
Function Conformity Per Section
All sections absolute conformity
Fixed Tap Quantity Per Section
1 5th section
Fixed Tap Quantity Per Section
1 7th section
Fixed Tap Quantity Per Section
2 6th section
Fixed Tap Quantity Per Section
2 8th section
Fixed Tap Quantity Per Section
3 2nd section
Fixed Tap Quantity Per Section
3 4th section
Tap Location Tolerance Per Section
-2.0/+2.0 degrees angular rotation all sections
Tap Location Tolerance Per Section
-2.0 to 2.0 degrees angular rotation all sections
Resistance Tolerance Per Section In Percent
-10.0/+10.0 all sections
Actuator Travel Control Feature
Continuous motion
Function Characteristic Per Section
All sections equation
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
25.0 all sections
Test Data Document
97942-577r900 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
45 turret
NSN
5905-00-056-4295
Part Number
752-6240
Description
Resistor,variable,nonwire Wound,
CAGE
12205

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rehostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.

Part 752-6240 NSN 5905-00-056-4295

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
37407
FIIG:
A002A0
Concept No.:
1
App. Key:
C
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
U
ESD:
B
ESD:
B
MMAC:
EH
CRITL:
X

Packaging & Shipping

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q

Freight Classification

NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
NMFC:
062960
UFC:
35140
LTL:
77.5
LCL:
--
WCC:
657
TCC:
3
SHC:
9
ACC:
Instruments/Radio

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this nonwire wound variable resistor (NSN 5905-00-056-4295) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 8533400080
  • SITC: 77235
  • End Use: Electric apparatus
  • NAICS: 334416
  • USDA: 1

Freight Class: Variable resistors, including potentiometers, nesoi

Highest Rated Parts
Recently Purchased Parts
Hot Parts