Special Features:

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step, head has 6-0.073 holes through equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line; identify per mil-std-130

Properties:

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. No. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use screw, externally relieved body. For items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. Excludes bolt, internal wrenching and screw, cap, socket head.