Special Features:

Design requirements: supply 4300 psi max & 3450 psi min, return 770 psi max & 115 psi min; proof pressures: supply 6000 psi, control 6000 psi, return 8000 psi, oil mil-h-5606, oil temp -65 to +275 degrees f, ambient temp -65 to +143 degrees f; flow characteristics: supply to control flow shall be .24 to .28 gpm @ 4000 psid, control to return flow shall be .56 gpm min @ 4000 psid, internal leakage shall not exceed .02 gpm max; for nha info for model cdas pdu02 refer to drwg 747985; drawing name servovalve, solenoid replacement

Properties:

A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes valve (1), butterfly.