Special Features:

Second end has one additional, ident, cross drilled through hole, 0.906 in. Distance from hole c to end, 2.000 in. Distance btwn hole c, 180 degrees angle btwn holes, both holes counterbored 0.312 in. Dia, 0.625 in. Dp from far side; second end has connecting plate, 3.722 in. Distance from end to plate, 0.312 in. Plate thk, plate has two unthd through holes 0.376/0.378 in. Dia, plate has one unthd through hole 1.500/1.504 in. Dia

Properties:

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.