Special Features:

Shim has 3 bolt holes, cntr to cntr dist. Between bolt holes along length is 1.350 in.; dia. Of two bolt holes is 0.385 in. Min. And 0.392 in. Max., dia. Of other bolt hole is 0.343 in. Min. And 0.350 in. Max.; top and bottom bolt hole on same centerline, middle bolt hole set 0.040 in. To left of centerline; top rt corner rounded w/radius of 0.220 min. And 0.250 max.

Properties:

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.