Special Features:

Gae, dummy spraybar-augmentor; consists of 5 idential assembly's, consisting of 1 dummy spraybar and a go/no-go gage w/flexible handle, dummy spraybar is an aisi 4140 welded assembly hardened to rc 38-42; one end has a block machined and drilled to mount on the core fuel nozzle mounting pad; opposite end has a slot for positioning the go/no-go gage, material is aisi type 0-2 hdn to rc 58-62; 0.125 in. Dia. Hole in 1 end is for the handle, material is 1010-1020 steel 0.25 in. Dia. Bar stock that is bent in a contour to clear the damper ring during and after insertion of dummy spraybar, 0.125 in. Dia. Stepped end holds the gage go no-go; set screws retains the handle in the gage, 2 0.094 dia. Pins, retain the gage go no-go in the dummy spraybar slot, container is supplied to store item

Properties:

A gage used to check or inspect contour, radius, chamfer, depth, thickness and/or height by inclusive fit of a work piece.