Special Features:

Per ams 5659, 15-5ph; passivate per ps-13001; consists of 1 shaft, detent, p/n 3867039-3; 2 roller, spherical, p/n 3831284; 2 shaft, roller, p/n 3867040-1; external involute spline data: 17 teeth, pitch 32/64, pressure angle 30 deg; heat treatment h1025 per ps-15227, mcair approved sources must be used; nha p/n 3867030 and is on p/n 3867000

Properties:

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.