Special Features:

Consist of body assembly 1, spool and sleeve assembly 1, cap 1, spring 4, retainer 3, bar 1, target assembly 1, solenoid assembly 1, pin actuating 1, seat return 1, seat assembly 1, ball 1, filter assembly 1, filter plug 1, gasket 1, nameplate 1, sensor 1, shipping plate 1, pin 1, screw 13, connector 1, o-ring 6, backup 2, washer 2, t-seal assembly 5, terminal ring 1, wire ar, epoxy primer ar, top coat ar; dimensions in inches, 2.150 wide, 4.400 long, 3.200 high; solenoid continuous duty, 202 vdc, current drain.13 amp at 202 vdc; flow rate 3 gpm at 40 psi; operating pressure 250-40000 psig cylinder ports, 100-2000 psig return ports; fluid media: hydraulic oil per mil-h-5606

Properties:

A manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: valve, solenoid. Excludes valve, plug. See also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.