Special Features:

operating pressure: 250 psig; collapse pressure: 200 psid; filter will not channel or bypass, due to the extreme uniformity of extruded carbon core, can be installed without prefiltration; filters are finished with an outer polypropylene spunbonded prefiltration medium; protective polypropylene netting is applied to the exterior of the cartridge; polypropylene end caps with compression gaskets; filters are not be autoclaved or steamsterilized

Properties:

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes filter element, air conditioning. See also strainer element, sediment.