Model: 2-300-034-01

Ground surface finish, machined retainer fabrication method, 0.0006 inches axial internal clearance, rbec no.5 standard tolerance designation.

Special Features:

Outer ring raceway 6 uin aa, outer ring lips 16 uin aa, od surface of outer ring 10 uin aa, all surfaces of rollers 2 uin aa, heat stabilized for operation at m65 to p350 degrees f, bearing specific dynamic load cap. 7270 lb, outer ring containers 6 slots on each face equally spaced so that the slots on 1 face are displaced by 30 degrees from slots on the opposite face, 0.050 in. Min, 0.055 in. Max w, 0.050 in. Min, 0.055 in. Max deep, id retainer and lip of outer ring concentric within 0.0003 in., od perpendicular w/outer ring faces within 0.00003 in. Tir, retainer id and od concentric within 0.003 in. Tir, center ring faces parallel within 0.0002 in., roller bearing surface parallel within 0.000025 and perpendicular w/faces within 0.00005 in.

Properties:

A nonadjustable roller bearing consisting of a single or multiple-row of hardened cylindrical rollers and a retainer used with or without inner or oute r rings. Excludes bearing, roller, airframe.