Special Features:

Universal joint is attached with a slip spline at the center which allows the joint to expand and contract; optional rubber-silicone boot is available for involute spline center connector; left endshaft is 4.080 in. Min.-4.120 in. Max. Long; 0.7480 in. Min.-0.7490 in. Max. In dia. And has a 0.2535 in. Min.-0.2545 in. Max. Dia. Hole 2.192 in. Min.-3.166 in. Max. From the end; right endshaft is same diameter as left endshaft; 2.180 in. Min.-2.219 in. Max. Long and has a hole 0.764 in. Min.-0.800 in. Max. From the end; connection end type: shaft

Properties:

A flexible connection designed for nonvehicular applications which permits rotary motion to be transmitted between two shafts located at an angle to each other. The angle between the shafts may be continually varied within certain limits; the connecting ends must have either a flange, hub, or splined stub shaft; the plain portion of a splined stub shaft must not exceed the length of the splines. Excludes drive or propeller shafts with joint(s) at one or both ends. See universal joint,geared.