Special Features:

Xfirst end external spline data includes type fillet root side fit asa b5 15-1950, 15 teeth, pitch 32/64, pitch diameter 0.469 in., pressure angle 30 degrees, outside diameter 0.500, root diameter 0.420, measuring pin diameter 0.060, second end external spline data includes type fillet root side fit ansi b92.1a-1976, 15 teeth, pitch 32/64, pitch diameter 0.469 in., pressure angle 30degrees, root radius 0.009, major diameter 0.500 in., form diameter 0.504 in. Max, minor diameter 0.395 in., measuring pin diameter 0.060 in.

Properties:

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.