Model: 12-30722-1

Flat Washer

Properties:

Cross Sectional Shape

Rectangular

Hole Diameter

1.031 inches

Edge Shape

Round

Center Hole Shape

1 round

Center Hole Shape

Round

Thickness

Between 0.276 inches and 0.286 inches

Overall Diameter

Between 1.860 inches and 1.890 inches

End Application

Piston assembly launching engine

Min. Tensile Strength (psi)

150000 pounds per square inch

Hardness Rating

Between 34.0 rockwell c and 38.0 rockwell c

Criticality Code Justification

Agav

Part Name Assigned By Controlling Agency

Inavy) washer piston assembly launching engine

Heat Treatment

As fabricated

Material

Steel comp 4140 or steel comp 4340

Material Specification

Sae assn standard all material responses

Test Data Document

81349-mil-h-6875 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

NSN

5310-00-531-1813

Part Number

12-30722-1

Description

Washer,flat

CAGE

80020

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.

Part 12-30722-1 NSN 5310-00-531-1813

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

13393

FIIG:

A022B0

Concept No.:

App. Key:

Cond. Code:

Status:

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators

HMIC

PMIC

ESD/EMI

ENAC

MMAC

CRITL

HMIC:

PMIC:

ESD:

MMAC:

CRITL:

Packaging & Shipping

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

Freight Classification

NMFC

UFC

LTL

LCL

WCC

TCC

SHC

ACC

NMFC:

194120

UFC:

95100

LTL:

RATING VARIABLE

LCL:

60.0

WCC:

713

TCC:

SHC:

ACC:

Trailers/Vehicles

Pricing & Availability Check

Submit this form for stock availability and pricing.

How to Order

Ordering from buyaircraftparts.com

If you would like to order this flat washer (NSN 5310-00-531-1813) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours:	08:00-18:00 Eastern Standard Time
Phone:	+1 470-231-0824
Email:	Contact Form »

Schedule B and Export

Schedule B: 7318220000
SITC: 69422
End Use: Finished metal shapes
NAICS: 332722
USDA: 1

Freight Class: Washers other than lock washers, iron or steel